At Diesel HQ we aim to stock a wide range of reconditioned engines for the most popular Diesel engine platforms.
Our engine cores are carefully sourced prior to undergoing a complete full-house reconditioning process to deliver a refreshed & reliable engine to breathe new life into your vehicle.
What Is Included In The YN2S Engine Rebuild Process?
When rebuilding our engines the following premium components are included:
- New TIK Replacement YN2S Pistons Set
- New Piston Rings Set
- New Conrod Bearings & Main Bearings
- Complete Engine Gasket
- New Front & Rear Crank Seal Kit
- New Head Bolts Set
- New Timing Kit
The YN2S Engine Block Machining Process Includes:
- Bore & Torque Plate Hone The Block
- Align Hone Crankshaft Tunnel
- Machine Block Deck Surface
- Blueprint Bearing Clearances
- File Fit Piston Ring End Gaps
- Balance Rotating Assembly
The YN2S Cylinder Head Machining Process Includes:
- Machine Cylinder Head Deck
- Recondition Combustion Chambers
- Recut Valve Seats & Reseat Valves
- Recondition Valves & Guides
What Are The Common Issues With The YN2S Ranger Engine?
Unfortunately there are a few common issues with the YN2S Ranger Engine. In saying that you should not let this put you off buying a Ranger, Luckily alot of the times this is due to lack of mechanical knowledge & inexperienced mechanic / owners working on these themselves.
Oil Starvation / Oil Pressure Issues after servicing. This is caused by the engine being completely drained & then not properly primed prior to start up, this results in the oil system not being able to prime itself and the engine runs low on oil pressure resulting in failures from no lubrication.
When rebuilding these engines we use a revised oil pump which is also a big improvement over the OEM design providing better flow.
Oil Consumption. Occassionally some of these engines suffer from excessive oil consumption & even blow-by. This a result of premature wear & excessive ring end gap clearance. When rebuilding these engines we use a piston set made by TIK pistons which features coated skirts & crowns for temparature control & a revised piston ring pack with specific end gap clearances which are file fit to spec.
YN2S Overheating. This is typically a result of poor maintenance resulting in failed radiator hoses or even cracked radiator fittings. Overheating in these causes issues quick resulting in a blown head gasket or worse, a cracked cylinder head! (In the event of cracked cylinder head, we keep replacement YN2S Cylinder Heads on the shelf ready to install.
All engines are carefully assembled by one technician from start to finish.
Our goal is to simplify the process by keeping majority of engines in stock / readily available for changeover in order to streamline getting your vehicle back on the road with minimal downtime & maximum reliability.
Why risk purchasing a second hand engine from a wreckers with no history OR costly downtime with mechanics diagnosing / misdiagnosing potential issues. Allow the experts to offer a completely refreshed engine ready to drop in with 12 months warranty!
Rest assured all of our cores are sourced as running engines prior to being rebuilt, we strictly do not accept blown up / broken engines as cores/changeovers!
Does Your Vehicle Need A Freshen Up?
Contact our team to discuss your needs & schedule your new engine today!
